价格:未填
供应:99999
发货:3天内
HT-80 hydraulic hot stamping machine output:80 tons 功能及特点：．人机介面屏幕显示，操作便捷、直观亲和 ．适合各类基材的烫金（压纹、磨砂、击凸），包括：纸张、板 纸、充皮纸、塑料片、PVC、布料等。 ．可配备收卷机，自动烫印卷筒包装纸。 ．HT-80机运转速度每分钟可达到42转。 ．肘节结构设计，油马达驱动，压力大、效率高。 ．配备有安全保护装置，平台式工作面，不受纸张限制，使用方便更安全。 ．润滑系统采用定时定量供油，保养方便可靠。 ．送烫金箔方式根据工作需要，可采用三组步进马达同步或跳步送箔。也可以采用横向或竖向送箔。送箔长度可随意调，烫金箔利用率高。 ．采用进口电器元件，液压使用意大利系列，机器性能卓越。 Functions and characteristics ．Human-machine interface screen, easy to operate, visual and kind appearance ．Apply for hot stamping(embossing, dull polishing, and projecting)on any kinds of basic ．Can be matched with take-in machine, automatic hot stamping rolling packing paper ．Speed of HT-80 can reach 42 turns per minute. ．Elbow joint structure design, oil motor driving, high pressure and efficiency. ．Matched with safety protection device, plane working face, non-limited by paper, easy and safe to be used. ．Greasing system is made use of automatic timing and constant fuel feeding, so it is much easy and reliable to maintain. ．Gold foil stamping can be used of trio stepping motor to feed in foil in phase or leapfrog required by working. Or foil can be fed in cross or vertical direction. Length of fed-in foil can be adjusted at will, and availability of gold foil stamping is much high. ．Make using of imported electric component, hydraulic system is imported from Italy, and performance is excellent. 技术参数Technical Data 型号MODEL HT-80 中心距离（毫米）Throat Depth(mm) 420 输出（公斤）Output(kg) 80000 送箔设计（马达式）Foil Feed Device(motor)三组（three sets） 热板面积（毫米）Size of Hot Plate(mm) 610*900 送箔方向Foil Feed Direction 横向或直向（front or side） 工作台行程/毫米Stoke/mm 60 电热（瓦）Heater Capacity(W) 9800 工作面积/毫米Table Size/mm 915*1200 温度调节Temperature Control 最高max.200℃ 最大纸张面积/毫米Max.Paper Size/mm 787*10441 加压时间/秒Dwell Time/ second 0-0.99 最小纸张面积/毫米Min.Paper Size/mm 360*340 马力/千瓦Motor Capacity/kw 7.5 最大工作高度/毫米Max.Daylight/mm 13 电源Power Source 3ph/380v/50HZ-16kw