价格:未填
供应:99999
发货:3天内
HT-10 hydraulic hot stamping machine output:10 tons 功能及特点： ．适合各类基材的烫金，包括：纸张、板纸、充皮纸、塑料片、PVC、布料等。 ．HT-10机运转速度每分钟可达到42转。 ．油缸驱动结构设计，行程高，速度快。 ．配备有安全保护装置，平台式工作面，不受纸张限制，使用方便更安全。 ．送烫金箔方式根据工作需要，可采用一组或二组马达式同步或跳步送箔。 送泊长度可随意调节，烫金箔利用率高。 ．采用进口电器元件，机器性能卓越。 Functions and characteristics ．Apply for hot stamping on any kinds of basic materials, including paper, board, leatherette paper, plastic plate, PVC and cloth materials. ．Speed of HT-10 can reach 42 turns per minute. ．Elbow joint structure design, oil motor driving, high pressure and efficiency. ．Matched with safety protection device, plane working face, non-limited by paper, easy and safe to be used. ．Gold foil stamping can be used of double stepping motor to feed in foil in phase or leapfrog required by working. Or foil can be fed in cross or vertical direction. Length of fed-in foil can be adjusted at will, and availability of gold foil stamping is much high. ．Make using of imported electric component, hydraulic system is imported from Italy, and performance is excellent. 技术参数Technical Data 型号MODEL HT-10 中心距离（毫米）Throat Depth(mm) 330 输出（公斤）Output(kg) 10000 送箔设计（马达式）Foil Feed Device(motor)一组（one sets） 热板面积（毫米）Size of Hot Plate(mm) 300*380 送箔方向Foil Feed Direction 横向（side） 工作台行程/毫米Stoke/mm 50 电热（瓦）Heater Capacity(W) 2400 工作面积/毫米Table Size/mm 580*760 温度调节Temperature Control 最高max.200℃ 最大纸张面积/毫米Max.Paper Size/mm 635*890 加压时间/秒Dwell Time/ second 0-0.99 最小纸张面积/毫米Min.Paper Size/mm 297*210 马力/千瓦Motor Capacity/kw 4 最大工作高度/毫米Max.Daylight/mm 57 电源Power Source 3ph/380v/50HZ-6.8kw