价格:0.00/台
品牌:立丹源
起订:1台
供应:100台
产品品牌：立丹源 产品型号：LDY-UVSI-1 有效照射宽度：1020MM UV灯管功率：12KW*3 专业印刷设备加装UV光源设备 ▲采用非漏滋变压器，高效节能。▲变压器功率因素达到0.85以上，比国家标准高达30％每小时省电超20度。▲电脑触摸屏精确控制，安全可靠。▲全部故障报警显示一目了然，安全快捷及时排除。▲采用德国、日本、台湾等各名牌原厂产品，保证系统性能稳定。 △水流水温自动检测报警保护。△快门故障、灯管故障报警自动保护。△合压强弱光自动转换，快门与印刷机联动，多灯任意选择。△电流过载自动保护，变压器、UV灯超温报警自动保护。△灯管老化，息灯报警功能。△无级调光技术，让UV灯功率输出实现30％-100％之间调节。▲水冷快门UV灯罩。▲高效节能、超低温度。▲针对不同的设备和承印基材，采用不同的冷却方式，以达到最理想的冷却效果。▲风冷快门灯罩、全水冷快门灯罩、水冷加辅助风冷快门灯罩。▲在胶印机、凹印机、柔印机等高速印刷机上，我们采用水冷加辅助风冷快门UV灯罩，以达到更理想的冷却效果。▲车间温度保证在25°C以内，承印产品干燥后温度能达到不高于35°C。●适配：▲德国罗兰、海德堡、高宝、日本三菱、良明、小森、樱井、北人、秋山、中山松德、西安黑牛、瑞士博斯特、意大利赛鲁迪等设备。▲Non-leakage Transformer is adopted for high efficiency and energy-saving purpose、▲The power factor of transformer is more than 0.85, 30% higher than the national standard which means it can save 20w power every hour.▲/Full touch screen is used for precision control, safe and reliable▲failure alarm is available to all functions, safe and fast to remove all failures、▲Branded components are used which are produced in Germany, Japan and Taiwan to ensure the stability of the entire system. △Automatic detection of water flow and temperature is available for protection、△Automatic failure alarm is available for shutter and lamp tube failures.△the automatic transfer between strong and weak lights and the shutter is interactive with the printer for more choice.△。Over-current automatic protection, super-temperature protection for transformer and UV lamp. △The indicator will flash off when the tube is aged△Stepless dimming technology is used to allow UV lamp power out can be adjustable from 30% to 100% ▲●water-cooler shutter UV shade▲High efficiency and energy-saving, super-low temperature  ▲Different cooling mode is adopted to different equipment and carrier materials for printing▲Air-cooled shutter cover, water-cooled shutter cover and water-cooled plus air-cooled shutter cover. ▲The water-cooled plus air-cooled shutter cover is adopted for offset printing press, gravure printing press and flexographic printing press for better cooling effect.  ▲If the room temperature can be ensure within 25°C, the printings can have a temperature less than 35°C after being dried. ▲     ●Adaptive Items▲Adaptive to printing presses such as Roland, Heidelberg, KBA, Mitsubishi, Ryobi, Komori, Oliver, Beiren, J-Print, Sotech, Blackbull of Xi’an, Bobst and Cerutti.  批发零售、无任欢迎0760-22833663