白色PPO 三菱工程塑料 AH60-7077标准产品
日期:2013-09-20 14:11 点击:912
价格:0.00/吨\r\n\t\
三菱PPO 又称 M-PPE AH60-7077
白色 阻燃等级UL94HB (自熄) 密度 1.06
耐温 120度
三菱PPO 特点 超刚性、耐冲击性及耐疲劳性 | | 绝缘性能优、低介电常数及低介电损耗正切 | | 吸水率低,成型尺寸稳定 | | 阻燃性及自熄性能佳 | | 低比重 | | 成型收缩率低,适用于精密零件 | | 脱模性及流动性优良,成型温度范围广 |
|
AH60 | AH70 | AH80 | AH90 | | | | | | | | | | | | | | - | - | - | - | - | Properties | Test Method | Terms | Units | | | | | | | | | | | | | | | | | | | - | - | - | - | - | | | | | - | - | - | - | - | | | | | - | - | - | - | - | | | | | | | Physical properties | | | | | | | | | | | | Density | ISO 1183 | - | g/cm3 | 1.06 | 1.06 | 1.07 | 1.07 | 1.07 | Water absorption | | 23degC, 50%RH | | - | - | - | - | - | | - | 23degC, 60%RH | % | - | - | - | - | - | | | 23degC, Underwater | | 0.07 | 0.07 | 0.07 | 0.07 | 0.07 | | | | | | | Rheological properties | | | | | | | | | | | | Melt Mass-flow Rate | ISO 1133 | | g/10min | - | - | - | - | - | Melt Volume-flow Rate | | cm3/10min | 17 | 8.1 | 5.9 | 6.5 | 4.8 | | Temperature | degC | 300 | 300 | 300 | 300 | 300 | | Load | kg | 2.16 | 2.16 | 2.16 | 2.16 | 2.16 | Moulding shrinkage | - | - | % | - | - | - | - | - | Moulding shrinkage (3.2mmt) | - | MD | % | 0.5 - 0.7 | 0.5 - 0.7 | 0.5 - 0.7 | 0.5 - 0.7 | 0.5 - 0.7 | | TD | 0.5 - 0.7 | 0.5 - 0.7 | 0.5 - 0.7 | 0.5 - 0.7 | 0.5 - 0.7 | Moulding shrinkage (1mmt) | - | MD | % | - | - | - | - | - | | TD | - | - | - | - | - | Moulding shrinkage (2mmt) | - | MD | % | - | - | - | - | - | | TD | - | - | - | - | - | Moulding shrinkage (3mmt) | - | MD | % | - | - | - | - | - | | TD | - | - | - | - | - | | | | | | | Mechanical properties | | | | | | | | | | | | Tensile modulus | ISO 527-1 , 527-2 | | MPa | 2500 | 2500 | 2500 | 2600 | 2700 | Yield stress | | 43 | 55 | 62 | 67 | 70 | Yield strain | | % | 3.2 | 5.0 | 5.4 | 5.5 | 5.5 | Nominal strain at break | 23 degC | 34 | 30 | 24 | 25 | 25 | Stress at 50% strain | | MPa | - | - | - | - | - | Stress at break | | - | - | - | - | - | Strain at break | | % | - | - | - | - | - | Flexural strength | ISO 178 | 23 degC | MPa | 76 | 95 | 102 | 110 | 118 | Flexural modulus | 2500 | 2500 | 2500 | 2600 | 2700 | Charpy impact strength | | 23 degC | kJ/m2 | 153 | 119 | NB | 150 | 140 | | ISO 179-1 | Charpy notched impact strength | , 179-2 | 23 degC | kJ/m2 | 17 | 19 | 18 | 11 | 8 | | | | | | | | | Thermal properties | | | | | | | | | | | | Melting temperature | ISO 11357-3 | | degC | - | - | - | - | - | Glass transition temperature | ISO 11357-2 | | degC | - | - | - | - | - | Temperature of deflection | ISO 75-1 , 75-2 | 1.80MPa | degC | 95 | 115 | 125 | 135 | 145 | under load | 0.45MPa | 110 | 130 | 140 | 150 | 160 | Vicat softening temperature | ISO 306 | - | degC | - | - | - | - | - | Coefficient of Linear thermal expansion | ISO 11359-2 | MD | 1/degC | 6.7E-05 | 6.6E-05 | 6.6E-05 | 6.6E-05 | 6.6E-05 | | TD | 7.1E-05 | 6.9E-05 | 6.9E-05 | 6.9E-05 | 6.9E-05 | Flammability | | - | - | - | - | - | - | - | | | 0.4mmt | - | - | - | - | - | - | | UL94 | 0.75mmt | - | HB | HB | HB | HB | HB | | | 1.5mmt | - | - | - | - | - | - | | | 2.0mmt | - | - | - | - | - | - | GWFI(Glow-wire flammability test method for materials) | IEC 60695-2-12 | 3.0mmt | - | - | - | - | - | - | GWIT(Glow-wire ignitability test method for materials) | IEC 60695-2-13 | 3.0mmt | - | - | - | - | - | - | | | | | | | Electrical properties | | | | | | | | | | | | Relative permittivity | IEC 60250 | 100Hz | - | - | - | - | - | - | | 1MHz | - | - | - | - | - | - | Dissipation factor | IEC 60250 | 100Hz | - | - | - | - | - | - | | 1MHz | - | - | - | - | - | - | Volume resistivity | IEC 60093 | - | ohm-m | 3.E 14 | 3.E 14 | 3.E 14 | 3.E 14 | 3.E 14 | Surface resistivity | IEC 60093 | - | ohm | 2.E 15 | 2.E 15 | 2.E 15 | 2.E 15 | 2.E 15 | Electric strength | | 1mmt | | 38 | - | 44 | - | - | | IEC 60243 1 | 2mmt | MV/m | - | - | - | - | - | | | 3mmt | | 20 | - | 65 | - | - | Comparative tracking index | IEC 60112 | - | - | - | 275 | - | - | - | | UL746A | - | - | - | - | - | - | - | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
|
联系方式