节能新型船舶钢结构制造操作架专机配套焊接系统

基本配置包括:新型主变电源,送丝机头,控制器

• 选用新型IGBT逆变电路，采用进口西门子模块，比传统SCR变压器电源节能30％以上
• 可靠性强，坚固耐用，行业内领先的林肯自动化专机变压器设计，保证焊机稳定输出，
• 100％暂载率，适合长时间大电流使用；
• 输入稳定，焊接平稳，焊缝成形好；有过流、过压、过热、过载等保护电路；
• 变压器，线路板等内部关键零件经过浸漆工艺，
• 确保有效防止焊接工况常见的水分，灰尘，金属粉尘，盐雾侵蚀。
• 可用于碳弧气刨；超长的焊接电缆，适用于船舶制造长缝焊的自动焊接；
• 专机机头可调结构紧凑，所有部件均可方便灵活地调节，满足客户实际现场调节的需要；
• 四轮驱动，运行平稳，可靠性好；可实现多种焊接方式；
• 合金钢送丝轮，使用寿命长，生产效率高；
• 可焊接碳钢、不锈钢、铜及铝合金等金属材料。性能卓越，质量可靠。
  

  Advantage

  500 amp output connections provide enhanced arc characteristics for low amperage submerged arc and MIG welding procedures. Single range control for precise output control and easy operation. Standard analog ammeter and analog voltmeter. Use the mode switch to select the desired output characteristics for the process being used – CV Submerged Arc, CV Innershield , CC Submerged Arc. Power start/stop push button (NVR) switches with pilot light. Fuse protected 115V wire feeder auxiliary power with 1000 volt-amp capacity. Terminal strip and output studs for remote connections and cable. Low profile case allows installation of the DC-1000 under a workbench and for stacking up to 2 machines to conserve floor space. Removable side panels for easy access to internal parts. Line voltage compensation maintains weld consistency, even with line voltage changes of ±10%. Electronic and thermostatic protection from current overload and excessive temperatures. Internal components, including windings, rectifiers and circuit boards, are coated to protect against the effects of moisture and corrosion. Recessed front panel protects operating controls. Manufactured under a quality system certified to ISO 9001 requirements and ISO 14001 environmental standards. 优点 具有简单量程的输出控制器能精确的控制输出，并且方便操作 电源开关带有指示灯。 保险丝保护115伏送丝机辅助电源，送丝机电源容量为1000伏安。 可移动侧板方便进入内部元件。 ±10%的网路电压补偿能维持焊缝的一致性。 具有过热保护和过电流保护的功能。 凹进的前面板能保护控制器。 一年保修期内提供维修。

  
  

  Physical Specifications