本公司供应劳保鞋，品牌久固 JIUGU，型号L862-X。质量保证，欢迎咨询洽谈。

久固牌防穿刺安全鞋说明

JobGo Brand Anti-stab Safety Shoes

1） 本品按GB12017－94标准生产。

2） 鞋底中间钢板能防刺穿硬度为HGC52 ， 4.50mm 0.05mm，尖端 1.00mm 0.02mm，长60mm－70mm的钢钉25mm/min速度穿刺鞋底，达到抗刺穿性能。

1） This Product is manufactured to the standard of GB12017－94.

2） The steel plate in the soles boasts of a strength to resist the stabbing by a steel nail of hardness at HGC52 , 4.50mm 0.05mm,tip end 1.00mm 0.02mm,and length between 60mm－70mm at a speed of 25mm/min.

久固牌防静电安全鞋说明：

JobGo Brand Anti-static Safety Shoes

1) 本品按GB4385－1995标准生产,电阻值范围为100k欧姆－1000k欧姆，能够消除人体静电积聚有能防止250V以下电流电击的防护鞋。

2) 防静电鞋和导电鞋在穿用时不应同时穿绝缘的毛料厚袜及绝缘的鞋垫。

3) 使用防静电鞋的场所应是防静电的地面，使用导电鞋的场所应是能导电地面。

4) 禁止防静电鞋当绝缘鞋使用。

5) 防静电鞋应与防静电服配套使用。

6) 穿用过程中一般不超过200h应进行电阻测试一次，如果电阻值不在规定的范围内，则不能作为防静电鞋使用。

1) This Product is manufactured to the standard of GB4385－1995,with resistance range from 100 －1000 ，can keep human body away from static accummlation and electric shock by current below250V.

2) When wearing antistatic shoes and conductive shoes,please be reminded not to wear insulating woolen socks orinsulating shoe pads.

3) The locations where antistatic shoes are used should be provided with the ground resisting static,while locations where conductive shoes are used should be provided with the ground conducting electricity.

4) Never use antistatic shoes as insulated shoes.

5) Antistatic shoes should be used together with antistatic clothing.

6) During the process,resistance test should be carried out once generally not exceeding 200h.If the value of resistance is not in the specified range,then they cannot be used to resist static.

久固牌绝缘安全鞋说明

JobGo Brand Insulated Safety Shoes

1) 本品按GB12011－2000标准生产,为电工安全防护用品，适应与380V以下的低压电工作业，对酸碱油有一定的防护作用，也可作为其他工种安全防护用品。

2) 本产品则穿用过程中，应避免锐器利物，一但刺穿绝缘底或鞋底防滑花纹磨平即不再具有绝缘性能。

3) 本产品绝缘性能标准：以1KVIS的速度使电压从零上升到6KV电压值的75％，然后再以100VIS的速度升到6KV应保持1min应精确到0.1mA.产品若不合格公司负责包换

4) 穿用绝缘皮鞋时严禁在鞋底钉铁钉，以防绝缘性能下降，穿用一段时间后应做预防性电器绝缘实验以确保安全。

1） This Product is manufactured to the standard of GB12011 2000，is applicable for low-voltage electrical operation below 380V,with protective function against acid,alkali and oil.It can also be used for other safety protectron purposes.

2） When wearing this product,keep it away from sharp objects.Once a sharp object stabs through insulating sole or the antiskid lines at the sole are worn flat,it loses the performance of insulation.

3） Isulating Property Standard:make voltagerysing from zero to the 75% of 6KV at a speed of 1KVIS,and then rising to 6KV at a speed of 100KVIS and maintaining for1mi minute,the precision could be 0.1mA.Replacement is guaranteed if there is ang product found unqualified.

4） Try to keep insulated shoes away from sharp objects.Steel nail cannot be inserted into the bottom ,as it may lower the insulating performance of pioduct.After the product.After the product has been used for a period,pereventative electical insulation test should be done to ensure security.

久固牌耐油、酸碱安全鞋说明

1) 本品按GB12756－97标准生产。

2) 本产品适应于石油、化工、煤矿、冶炼、采伐等行业。

3) 严禁长时间在水中、潮湿、高温的环境下，只可在弱酸、弱碱中使用，并具有一定的耐油作用

JobGo Brand Oil resistant、Acidproof、Bears the alkali Safety Shoes

1) This Product is manufactured to the standard of GB12756－97。

2) This product adapts in the petroleum, the chemical industry, the coal mine, smelting, cuts and so on the profession

3) Strictly prohibits the long time in the water, being moist, under the high temperature environment, only may in the weak acid, Proportion few alkali， center use, and has the certain oil resistant function