价格:0.00/只
品牌:ANDU FUYUAN
供应:20000000只
1.規格型號和安規認證MODEL NUMBER AND SAFETY CERTIFICATION1-1 品名規格：系列號 額定電流 額定電壓 認證符號 Model Number: Part Number Rated Current Rated Voltage Approvals.例子[example]:6GFU 1A 250V 1)系列號 Part Number 2)額定電流 Rated Current1） 2） 3） 3)額定電壓 Rated Voltage1-2 額定電流和額定電壓Rated Current And Voltage額定電流： 63mA~30ARated Current: 63mA~30A額定電壓;125V/250V ACRated Voltage:125V/250V AC1-3標示Marking保險絲上需有下列標示The fuse shall have the following marking:規格：特性符號 額定電流 額定電壓Specification:Characteristic Symbol Rated Voltage 63mA~800mA : _mA250V 1A~30A:_A250VTrade mark:The Manufacture’s Logo Part Number Approvals
63mA~15A: 注意：對標示字樣大小沒有規定Note:Size of the markings have not be specified.2.適用範圍SCOPE適用於一般電子設備。Used in electronic equipment.3.工程圖和結構OUTLINE DRAWING AND STRUCTURE3-1 工程圖（單位：mm）Outline Drawing and Dimensions(Unit:mm)3-2結構Structure
| 編號No. | 元件Component | 材質Material | 數量Quantity |
| (1) | 熔絲Wire | 合金Alloy | 1 |
| (2) | 銅帽Cap | 黃銅鍍鎳Brass with mickel plated | 2 |
| (3) | 本體Body | 玻璃管Glass Tube | 1 |
| (4) | 引線Lead | 鍍錫銅線Tinned Copper wire | 2 |
4.外觀及形狀APPEARANCES AND CONFIGURATION4-1外觀：不應有破碎、明顯的汙斑Appearances:There shall no fragmentation and of remarkable blotch.4-2形狀：帶腳的保險絲Configuration:Axial Leaded Fuse.5.物理特性PHYSICAL CHARACTERISTIC5-1 拉力測試Tensile test沿端子的軸向施加10N的拉力，持續1分鐘。Keep pulling the cap of the fuse with 10N at axial direction for 1 min.6.電氣特性ELECTRICAL CHARACTERISTICS熔斷/電流特性：Pre-Arcing Time/Current Characteristica、Breaking capacity（分断能力）(Time Lag and Fast Acting)
| 10000A | 125V | AC |
| 35A | 250V | AC (less or 1A) |
| 100A | 250V | AC (1.1A—3.5A) |
| 200A | 250V | AC (3.6A—30A) |
b、Electrical characteristicsTime Lag (参照美标)
Rated current | 135% | 200% | 1000% |
| 63mA~30A | Max. | Max. | Min. |
| 1 hour | 120 sec | 10 ms |
Fast Acting(参照美标)
Rated current | 135% | 200% |
| 63mA~30A | Max. | Max. |
| 1 hour | 120 sec |
(参照国标)
| Rated current | 210% | 275% | 500% | 1000% |
| Max | Min | Max | Min | Max | Max |
| 50mA~100mA | 20s | 2ms | 200ms | 1ms | 30ms | 5ms |
| 100mA~10A | 20s | 20ms | 1500ms | 8ms | 400ms | 80ms |
c、Temperature characterWhen 100% of rating the temperature rise doesn’t exceed 75℃.d、Approvals
| Catalogue number | Rated current | Voltage | 参照国标,美标 |
| 6F/6FP/6T/6TP | 63mA~30A | 125V/250V |
7.環境特性ENVIRONMENTAL SPECIFICATION7-1 操作溫度範圍：-5℃~60℃Operating Temperature: -5℃~60℃7-2 保存條件Storage Conditions溫度： 10℃~60℃Temperature: 10℃~60℃在相對濕度≤75%下平均可存放3年On average, It can be stored below the relative humidity or 75% for 3 years.在非露天下，相對濕度為95%下最多可存放30天。Without dew, It can be kept under humidity of 95% for 30 days.8.焊接條件SOLDERING PAAMETERS8-1波峰焊Wave Solder焊接溫度：260±5℃Soldering Temperature:260±5℃焊接時間：4 Sec. Max.Soldering Time:4 Sec.Max.8-2手工焊錫Manual Solder焊接溫度：350±5℃Soldering Temperature: 350±5℃焊接時間：3 Sec. Max.Soldering Time: 3 Sec. Max.9.其他使用注意事項OTHER NOTICE IN USING如果需在保險絲上加熱縮套管，烘烤溫度與時間需參照以下規定If heat shrink tubing was needed,the roast temperature and time should be refer to the following.設定烘烤溫度：不大於150℃ 烘烤時間：50s Max.The temperature should be sel under 150℃,roast time:50s Max.
