价格:0.00/千克
品牌:金全牌和金蛛牌
供应:1000400千克
有效物质含量:100（％）功能:无毒增塑剂主要用途:塑料增韧剂A-666通用型塑料增韧剂www.51chinaall.com 0755-28996208覃小姐 型号：A-666颗粒增剂 品牌：金全牌和金珠牌颗粒增剂 Brand: 类型：聚酯增塑剂 有效物质含量：100（％） 功能：耐寒增塑剂 产品规格：20KG/件 主要用途：塑料增韧耐寒抗冲击 CAS：108-52-63 金全牌和金蛛王牌塑料颗粒增韧剂产品用途： A-666适合任何塑料 金全牌和金蛛王牌塑料颗粒增韧剂的用法和用量： 1、成本极低，用量为0.6-1%，即1KG原料加入6-10克增韧剂，用量极少；请务必用25KG塑料试样并且用混料机搅拌5-8分钟（用几KG料试不准）。 1.Ultra-low cost: Dosage is 0.6%~1% namely addle 6~10g toughner to 1KG material. Recommended dosage is 2%. Be sure that 25KG plastic sample is used and mixed in blender for 15~20minutes 2、用法简单：只需在混料时把增韧剂加入，与水口料、再生料和原料混合搅拌5-8分钟，拌匀后即可加热烤料挤出、注塑或吹塑成型。 2. Simple usage: toughening agent is added in process of blending materials, recycled materials or raw materials for 5~8 minutes, when the materials has been uniformly blended, the mixture can be heated for extrusion and blow or injection molding. 3、要测试加入A-661/662/666/668金全牌和金蛛王牌和金蛛王塑料颗粒增韧剂的效果，请在挤出、注塑或吹塑成型24小时后进行，这样效果更加明显；请用同种材质的胶料做比较，测试产品尽可能用平面无孔产品。 3. If you want to test the effection of A-661 Allgong brand plastic granule toughening agent, please carry out it after that the extrusion and injection or blow molding have been finished fou 24 hours. That will make the effection more obvious. Please compare it plastinof the same materials and try your best to use plane product without hole. 4、包装、贮存和保质：纸塑袋或纸箱包装，净重20 KG/件，须注意防晒、防潮、防污染，本产品保质期三年。 4. Package, stockage and durability: package is paper box or plastic bag, and the net weight is 20KG/piece. Please keep away from insolation, moisture and contamination. Product durability is 3 years. 注意：使用本产品如不慎溅入眼中，请用大量清水冲洗或到附近医院就诊。 Caution: Detergent should be used to clean this product. If this product splashes into eyes, please flush the eyes with a great amount of water and go to see the doctor. 公司电话：0755-28996208 覃 S：13613064313伏 S：13760332361联系QQ：1223135669公司网站：www.51chinaall.com 网址：www.jindaquan.com