价格:未填
品牌:32
发货:3天内
 德国rapp-polymere公司代理商，rapp-polymere中国一级代理，rapp-polymere总代理商

西安瑞禧生物科技有限公司2015年与德国rapp-polymere公司签约代理，成为德国rapp-polymere公司的中国区代理商，专业销售德国rapp-polymere公司的小分子PEG产品以及固相合成树脂等产品。

 

聚乙二醇PEG产品和固相合成树脂查询联系方式：

 

联系电话：029-86354885

销售经理：13309186942

销售邮箱：sales@xarxbio.com

          sales@Resenbio.com

特殊定制邮箱：custservice@xarxbio.com

 

官网网站：http://www.rapp-polymere.com/

 

产品列表：

Aminomethyl Resins（氨甲基合成树脂）产品介绍：

Aminomethylated polystyrene resins are prepared in-house from crosslinked polystyrenes by a direct aminomethylation reaction according to highly optimized protocols. Resins produced by our process are chemically defined, homogeneous and free from any additional crosslinking from the functionalization process. Aminomethylated polystyrene resins can easily be acylated with any appropriate carboxylic acid-containing linker using standard methods of amide bond formation to furnish supports for solid phase organic synthesis.

产品列表：

Polystyrene AM NH₂    particle size: 100-200 mesh   capacity: 0.8 - 1.4 mmol/g

Polystyrene AM NH₂    particle size: 200-400 mesh   capacity: 0.8 - 1.4 mmol/g

Polystyrene AM NH₂    particle size: 125-160 mesh   capacity: 0.8 - 1.4 mmol/g

Polystyrene AM NH₂    particle size: 160-200 mesh   capacity: 0.8 - 1.3 mmol/g

Polystyrene AM NH₂    particle size: 250-315 mesh   capacity: 0.8 - 1.2 mmol/g

Polystyrene AM NH₂    particle size: 400-450 mesh   capacity: 0.8 - 1.2 mmol/g

Polystyrene AM NH₂    particle size: 500-560 mesh   capacity: 0.8 - 1.2 mmol/g

Aminoethyl Polystyrene Resins（氨基聚苯乙烯树脂）

Aminoethylated polystyrene resins can easily be derivatized by any carboxylic function according to standard methods for amide bond formation. The phenethyl linkage is more stable toward acid treatment than the benzyl group.

产品列表：

Polystyrene A NH₂    particle size: 100-200 mesh   capacity: 0.8 - 1.4 mmol/g

Polystyrene A NH₂    particle size: 200-400 mesh   capacity: 0.8 - 1.4 mmol/g

Polystyrene A NH₂    particle size: 125-160 mesh   capacity: 0.8 - 1.4 mmol/g

Polystyrene A NH₂    particle size: 160-200 mesh   capacity: 0.8 - 1.3 mmol/g

Polystyrene A NH₂    particle size: 250-315 mesh   capacity: 0.8 - 1.2 mmol/g

Polystyrene A NH₂    particle size: 400-450 mesh   capacity: 0.8 - 1.2 mmol/g

Polystyrene A NH₂    particle size: 500-560 mesh   capacity: 0.8 - 1.2 mmol/g

Aminobutyl Polystyrene Resins丁基苯乙烯树脂

The C4 chain acts as a hydrophobic spacer molecule to separate the amino function from the crosslinked matrix to increase the kinetic rates. Aminobutylated polystyrene resins can easily be derivatized by any carboxylic function according to standard methods for amide bond formation.

产品列表：

Polystyrene C4 NH₂   particle size: 45 - 80 µm      capacity: 0.8 - 1.3 mmol/g

Polystyrene C4 NH₂   particle size: 80 -160 µm      capacity: 0.8 - 1.3 mmol/g

Polystyrene C4 NH₂   particle size: 125-160 µm     capacity: 0.8 - 1.3 mmol/g

TentaGel® S - NH₂ Standard TentaGel® Resins产品：

Standard resin for a large number of applications, useful in batch and flow through systems. This resin is recommended for synthesis of standard peptides up to 40 residues in length.

产品列表：

TentaGel® S NH₂     particle size: 130 µm     capacity: 0.2 - 0.35 mmol/g

TentaGel® S NH₂     particle size: 90 µm      capacity: 0.2 - 0.35 mmol/g

 

TentaGel® R - NH₂ TentaGel® Research Resins产品：

TentaGel® resins are grafted copolymers consisting of a low crosslinked polystyrene matrix on which polyethylene glycol (PEG or POE) is grafted. The PEG spacer is attached to the matrix via an ethyl ether group which increases stability towards acid treatment and minimizes PEG-leaching. As PEG is a „chameleon type“ polymer with hydrophobic and hydrophilic properties, the graft copolymer shows modified physico chemical properties which are highly dominated by the PEG moiety (and no longer by the polystyrene matrix). These graft copolymers are pressure stable and can be used in batch processes as well as under continuous flow conditions. The PEG spacer is in the range of MW 3000 Da.

A special designed resin for research synthesis. Long peptide sequences (up to 100 residues), difficult sequences and PNA´s are synthesized on this support. The resin shows an increased swelling volume and a significant lower loading.

产品列表：

TentaGel® R NH₂   particle size: 90 µm     capacity: 0.18 - 0.22 mmol/g

 

TentaGel® XV - NH₂ - A Sophisticated Resin for the Solution of Synthesis Challenges产品：

TentaGel® XV resin (XV stands for "Extended Swelling Volume") is a new member of the TentaGel family. Modifications on the polystyrene backbone change the swelling properties of the PEG grafted resin.

Swelling properties are in the same range or even higher compared to PEGA or Chematrix resins. The polar PEG spacers allow the composite resin to swell in a wide range of solvents including water, methanol, DMF, DCM. Nevertheless, the handling is still very easy and similar to other TentaGel resins.

The high swelling creates an extended reaction space. This enlarged reaction volume meets the requirement for ideal conditions for the synthesis of difficult sequences, aggregating peptides, mini proteins and PNAs in high purities and excellent yields.

产品列表：

TentaGel® XV NH₂      particle size: 100 - 200 µm    capacity: 0.2 - 0.4 mmol/g

 

TentaGel® HL - NH₂ High loaded TentaGel® Resins产品介绍：

This highloaded version of TentaGel® combines a significantly higher capacity with the advantages of TentaGel® resins. The spacer is in the range of MW 1500 - 2000 Da.

产品列表：

TentaGel® HL NH₂       particle size: 110 µm       capacity: 0.4 - 0.6 mmol/g

TentaGel® HL NH₂       particle size: 160 µm       capacity: 0.4 - 0.6 mmol/g

TentaGel® HL NH₂       particle size: 75 µm        capacity: 0.4 - 0.6 mmol/g

 

TentaGel® MB - NH₂ TentaGel® Macrobead Resins产品介绍：

TentaGel® Macrobeads are highlighted by extraordinary large particle diameters and high capacities based on the TentaGel® technology and designed for single bead synthesis and single bead analysis.

产品列表：

TentaGel® MB NH₂         particle size: 140-170 µm        capacity: 0.2-0.3mmol/g

0.5 nmol/bead; 520 000 beads/g

TentaGel® MB NH₂         particle size: 200-250 µm        capacity: 0.2-0.3mmol/g

1.5 nmol/bead; 160 000 beads/g

TentaGel® MB NH₂         particle size: 280-320 µm        capacity: 0.2-0.3mmol/g

3.5 nmol/bead; 65 550 beads/g

 

HypoGel® -NH₂ Resins产品介绍：

"HypoGel® is a hydrophilic gel type resin which combines high capacities with good solvent compatibility. Glycol spacers with n = 5 or 10 EO units separate the reactive sites from the polystyrene matrix and modify the hydrophobic properties of the polystyrene backbone. Due to the spacer effect the functional group shows a higher mobility which results in higher kinetic rates and high resolution NMR spectra from immobilized compounds on the bead. The resin is compatible to a wide range of solvents and in contrast to polystyrene even polar solvents like methanol or ethanol can be used.

产品列表：

HypoGel® 200 NH₂   particle size: 110 – 150 µm    capacity: 0.6 – 0.9 mmol/g

HypoGel® 400 NH₂   particle size: 110 – 150 µm    capacity: 0.5 – 0.7 mmol/g

 

TentaGel® S Boc-Hydrazido产品介绍：

Can easily be converted to the azide by NaNO2/HCl treatment and is used for nucleophilic replacements.

产品列表：

TentaGel® S NH-NH-Boc   particle size: 130 µm    capacity: 0.2 - 0.3 mmol/g

TentaGel® S NH-NH-Boc   particle size: 90 µm     capacity: 0.2 - 0.3 mmol/g

Merrifield Resin (Chloromethyl Polystyrene)产品：

The Merrifield resin has in the past been the standard support for the synthesis of peptide acids by Boc strategy. Originally, the cesium salt of a protected amino acid was anchored to the chloromethyl support via nucleophilic displacement of chlorine.

产品列表：

Chloromethyl Polystyrene   particle size: 100-200 mesh   capacity: 0.8 - 1.2 mmol/g

Chloromethyl Polystyrene   particle size: 200-400 mesh   capacity: 0.8 - 1.2 mmol/g

Bromo Polystyrene Resins（溴代聚苯乙烯树脂）产品：

A functional resin for the synthesis of many different aryl based derivatives containing e.g. carboxylic acid, aldehyde, thiol, phosphine or silyl chloride groups. Treatment of this resin with nBuLi generates the intermediate for the mentioned compounds.

产品列表：

Bromo PS      particle size: 100 - 200 mesh      capacity: 2 - 4 mmol/g

Bromo PS      particle size: 200 - 400 mesh      capacity: 2 - 4 mmol/g

Bromo PS      particle size: 125 - 160 mesh      capacity: 2 - 4 mmol/g

Bromo PS      particle size: 160 - 200 mesh      capacity: 2 - 4 mmol/g

Bromo PS      particle size: 250 - 315 mesh      capacity: 2 - 4 mmol/g

Bromo PS      particle size: 400 - 450 mesh      capacity: 2 - 4 mmol/g

Bromo PS      particle size: 500 - 560 mesh      capacity: 2 - 4 mmol/g

Bromoethyl Polystyrene Resins（溴乙基聚苯乙烯树脂）产品：

These resins are alternatives to the corresponding halomethylated resins; but in comparison to the benzyl support, this resin leads to more acid-stable products due to the resulting phenethyl group.

产品列表：

Polystyrene A Br    particle size: 100-200 mesh    capacity: 0.8 - 1.2 mmol/g

Polystyrene A Br    particle size: 200-400 mesh    capacity: 0.8 - 1.2 mmol/g

Polystyrene A Br    particle size: 125-160 mesh    capacity: 0.8 - 1.2 mmol/g

Polystyrene A Br    particle size: 250-315 mesh    capacity: 0.8 - 1.2 mmol/g

Polystyrene A Br    particle size: 400-450 mesh    capacity: 0.8 - 1.2 mmol/g

Bromobutyl Polystyrene Resins聚苯乙烯树脂的合成产品：

The Br functionality is separated by a C4 spacer from the crosslinked matrix. Due to this spacer effect the functional group shows a higher mobility which results in higher kinetic rates and high resolution NMR spectra from immobilized compounds on the bead.

产品列表：

Polystyrene C4 Br    particle size: 45 - 80 µm    capacity: 0.8 - 1.3 mmol/g

Polystyrene C4 Br    particle size: 80 - 160 µm    capacity: 0.8 - 1.3 mmol/g

Polystyrene C4 Br    particle size: 125 - 160 µm    capacity: 0.8 - 1.3 mmol/g

TentaGel® S Br Standard TentaGel Resins产品：

Standard resin for a large number of applications, useful in batch and flow through systems.

产品列表：

TentaGel® S Br    particle size: 130 µm    capacity: 0.2 - 0.3 mmol/g

TentaGel® S Br    particle size: 90 µm    capacity: 0.2 - 0.3 mmol/g

TentaGel® HL Br High loaded TentaGel Resins产品列表：

This highloaded version of TentaGel® combines a significantly higher capacity with the advantages of TentaGel® resins. The spacer is in the range of MW 1500 - 2000 Da.

产品列表：

TentaGel® HL Br   mean particle size: 110 µm    capacity: 0.4 - 0.6 mmol/g

TentaGel® HL Br   mean particle size: 75 µm    capacity: 0.4 - 0.6 mmol/g

TentaGel® MB Br TentaGel Macrobead Resins产品列表：

TentaGel® Macrobeads are highlighted by extraordinary large particle diameters and high capacities based on the TentaGel® technology and designed for single bead synthesis and single bead analysis.

产品列表：

TentaGel® MB Br   particle size: 140 - 170 µm    capacity: 0.4 - 0.6 mmol/g    

0.86 nmol/bead; 520 000 beads/g

TentaGel® MB Br   particle size: 200 - 250 µm    capacity: 0.2 - 0.3 mmol/g    

1.5 nmol/bead; 160 000 beads/g

TentaGel® MB Br   particle size: 280 - 320 µm    capacity: 0.2 - 0.3 mmol/g    

3.5 nmol/bead; 65 550 beads/g