价格:未填
供应:99999
发货:3天内
APV6气压式提动阀，标准规格 规格：APV6材质：聚四氟乙烯品牌：KGN型号：APV6产品别名：提动阀适用范围：工业连接形式：如图类型(通道位置)：直通式驱动方式：请咨询用途：请咨询适用介质：环氧树脂·矽胶油·墨水·润滑油·UV胶·RTV矽胶·电解液压力环境：0.3-0.69MPa產品名稱 : 008-提動閥型號 : APV601N特点（Features）：?回吸机能，防止吐出滴漏 Reverse-sucking mechanism to prevent leakage or dripping during discharge.?回吸调整机能，可微量调整 Flow rate adjusting mechanism is provided with fine-tuning function.?接液部材质可依客户需求对应各种胶材 The material of liquid receiving section will be selected according to the gel used upon the requirement of the customer. 概要 Outling: 提动阀关于空压作动式阀，用0.30MPa以上的空气压就可开启阀，并可透过内藏得弹簧来关闭阀。可用于KGN的点胶机与压送容器（胶管·压力桶···等），还可调整材料的压送压力与阀的开放时间及搭配不同的针头口径尺寸，从微量吐出开始控制。此类阀于关闭时，还可发挥“回吸”材料之功能。 Poppet valve is a pneumatically operated valve. Valve is on when pressure is over than 0.30MPa and off by a built-in spring. When use dispense controller and pressure tank, the shot volume can be controlled to a very small amount by adjusting the mateial delivery pressure and the valve opening time. Valve has suck back effect to suck back the material before the valve is off. ˙Volume(c.c/min):0.1mPa/min water testing result. 流量(c.c/min):用水加壓0.1MPa持續吐出1分鐘所得之測試值。 适用材料（Applicable materials）:Model 型号Applicable materials 适用材料APV601NEpoxies.Silicone oil . lnks. Greaes.UV adhesives.Rtv silicones.Electrolytes.环氧树脂·矽胶油·墨水·润滑油·UV胶·RTV胶·电解液