品牌:Puls 普士电子
产品品牌：Puls 普士电子
产品型号：GK75 /A01
工作温度范围：0-60 ℃
尺寸：127.5 x 260 x 100 mm
产品性能：易安装/高效/安全/长寿命
Power Supply is source with high voltage generator designed for devices of active ionization. It can be one or two-fan. Its set-up and operation is simple in use and does not need any additional care. It is possible to supply the operation for more than one static bar. There is a protection card inside of it for the system security in case of short circuit. Power Supply cuts down current and disables circuit in connected to it high voltage cable of ionization devices or ionizer. That provides longer life and safety to the transformer, what is inside of power supply.
该静电消除电源是一种高压发生器,是产生活跃电离子的一种装置.它可以驱动一台或两台离子风扇.设置简单,操作容易.可接一台以上的静电棒.设备内部有保护卡装置防止短路.如发生短路,电源和输出装置之间的电流将被切断,保护电源内部的变压器的安全,延长变压器的寿命.
Due to high technologically design used in Power Supply it became possible to produce more efficient results to solve the static troubles, even in high-speed applications. Power Supply does not need any calibration and can be cleaned and cared easily. Using Power Supply will supply machines to perform hygienic, safe and qualitative production. Power Supply can be designed in different lengths to satisfy the requirements of needs of application.
拥有高尖端的设计该电源能提供更高效的静电解决方案,尤其应用于高速设备。电源不需要校准,容易清洗和维护。
使用该静电消除电源可让您的生产更清洁、安全、高效。电源尺寸可定制，以满足各种设备的不同需求。
General Specification常规性能
Easy to install / High performance / Safety / Long life
易安装/高效/安全/长寿命
Applications应用
Coating涂层/ Laminating层压/ Plastic bag塑料袋/ Sheeting薄膜/ Slitting分切/ Rewind绕线机/ Form fill seal填充密封
/ Stretch wrapping拉伸包装/ Wrapping machines包装机/ Paper production纸张制造/ Blown film吹塑薄膜，cast film薄膜/ Extrusion挤压, flexo sheet印片/ Inkjet喷墨, laser激光/ Folding折叠
比国内大多数同类产品电压更高,消除静电时间更快.
Main Voltage电压 | 220-230 VAC/ 110V AC |
Main Frequency主频率 | 50 / 60 Hz |
Main Connection接线 | IEC-320 Europe Type |
Fuse保险丝 | 160 mAT/A |
Output Voltage输出电压 | 7.5 k VAC |
Max Output输出电流 | Less than 5 mA |
Connections连接口 | 4个 |
Ambient Temperature使用温度 | 0 - 60 C |
Weight重量 | 3.2 Kg |
Dimensions尺寸 | 127.5 x 260 x 100 mm (width x height x length) |
Approval认证 | CE |
