OPtiseal F14 F16 F15 F17蝶阀阀座-供应-贸易谷手机版

OPtiseal F14 F16 F15 F17蝶阀阀座

日期:2023-12-13 11:02 点击:28

价格:未填
品牌:keystone
发货:3天内

keystone OPtiseal F14 F16 F15 F17蝶阀阀座

keystone
Fig.optiseal.15 Fig14蝶阀 Fig15蝶阀 keystone Fig15 Fig14 Fig16 Fig17气动蝶阀 F14 F15 F16 F17食品级阀门阀座 F14气动蝶阀 F15气动阀门 F16气动蝶阀 F14食品级蝶阀 F14食品级阀座 F14啤酒蝶阀 F14糖厂阀门 F14对夹式蝶阀 F14阀座 F14胶圈 F14衬胶阀门 F14 EPDM阀座 F14 NBR阀座 F14手轮蝶阀 F14气动蝶阀 F14气动调节阀 F14气动开关蝶阀 F14气动调节阀门 F14阀门 F14阀座 TYCO KEYSTONE F14-F17系列蝶阀为调节型蝶阀，主要用于食品行业*Keystone标准顶法兰*薄阀板设计、适于调节*阀座易更换、耐蚀*阀杆两级密封*连接方式：对夹、支耳

TYCO KEYSTONE F14-F17系列蝶阀的详细介绍

TYCO KEYSTONE F14-F17系列蝶阀为调节型蝶阀，主要用于食品行业

泰科流体基士敦阀门为客户节约使用成本。

特点及优点

*Keystone标准顶法兰

*薄阀板设计、适于调节

*阀座易更换、耐蚀

*阀杆两级密封

*连接方式：对夹、支耳

标准规范

尺寸（mm）：40～300

适用温度：－40～160℃

最大压力（MPa）：1.6

阀体材质：铸铁、碳钢、碳钢

阀板材质：球铁、不锈钢、EPDM包覆钛材、Hastelloy

阀杆材质：不锈钢、碳钢、钛材

阀座材质：乙丙橡胶EPDM、zmw11294橡胶NBR、氟橡胶PTFE/EPDM

应　用

气泡级密封，流阻小，耐磨耐腐蚀，适用于食品，饮料，干物料运输，造纸，浆体处理等。

The OptiSeal is a further development of previous, successful resilient seated valve designs. The range incorporates several features, even further enhancing the valve’s lifetime and performance

Features

• Top bushing absorbs actuator side thrust loads.

• Dirtscraper prevents moisture penetrating into the shaft area.

• Actuator flange acc. ISO 5211.

• High solid, glossy, silicone free, paint system ensuring excellent corrosion resistance.

• Extended body neck allows pipe insulation.

• Body locating holes ease installation and centering between the flanges.

• Sealed body splits prevent moistures from penetrating behind the seat (up to DN300).

• Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life and bubble-tight shut-off.

• The seat is field replaceable and fully isolates the body and stem from the flow.

• Primary stem sealing exceeds the pressure rating of the valve and prevents leakage through shaft area to atmosphere.

• A secondary shaft sealing provides back-up safety.

• A molded-in O-ring in the seat for flange sealing eliminates the need for gaskets.

• The thin disc provides the very minimum obstruction to flow (up to DN300).

• Top and bottom shaft bearings for optimized support and minimum friction in all body materials up to DN300, except cast iron.

• Relief hole drains possible fluids from the top plate recess space (up to DN300).

• Wafer and lugged body design, acc. ISO 5752/5 short. (DIN 3202, Part 3/K1).

• All valves comply to Pressure Equipment Directive (97/23/EU) Module H – CE Marking.

Available approvals: FDA, KTW/DVGW, KIWA, DGS, ABS, DNV, WRAS

Technical data

Pressure (bar)

: 10-16

End of line (bar)

: 6-10-16

Temperature (°C)

: -40 + 160

Sizes (mm)

: 40-900

Flange

accommodation

: PN 6/10/16

ANSI 150

JIS 5K/10K

联系方式

公司:深圳市德隆泰科技有限公司（深圳总部）
发信:点此发送
姓名:邹佳群(先生)
电话:0755-89686735
手机:13538266849
地址:深圳市龙岗区平湖华南城M05栋118号
邮件:tyco135@163.com
QQ:1417946209

Technical data
	Pressure (bar)	: 10-16
	End of line (bar)	: 6-10-16
	Temperature (°C)	: -40 + 160
	Sizes (mm)	: 40-900
	Flange
	accommodation	: PN 6/10/16
		ANSI 150
		JIS 5K/10K